Friday, November 13, 2026 · Ocean Shipping & Ports
Real-Time Ship Monitoring Goes Beyond Noon Reports, Karataş Tells EUROPORT
Noted by David Johnson · 836 reads
Ömür Karataş argued at EUROPORT Istanbul 2026 that sensor data should supplement daily noon reports, but only when engineers can interpret it.

The noon report has been the backbone of ship-to-shore communication for decades. It gives shore management a summary of the previous 24 hours. At EUROPORT Istanbul 2026, Ömür Karataş, founder of ORTECH Marine and founding president of the Ship Repair Industrialists Association (GOSDER), made a case for moving beyond that once-a-day snapshot. His point was simple: the data is only useful if people with real engine-room experience can read it.
Why a daily report isn't enough
Karataş didn't argue that noon reports are obsolete. He said they still matter. The problem is timing. A fuel consumption spike, a shift in load, or an early sign of machinery trouble can happen well within a day, and by the time it appears in a daily report, the options for intervening may be narrower. Real-time monitoring lets technical teams see the problem as it develops and weigh their response options before it gets expensive.
That's the operational case. Fuel costs are part of it, but Karataş tied the shift to environmental rules as well, which is where it starts to get commercially serious.
What the system actually collects
The architecture Karataş described is more concrete than a generic "IoT for ships" pitch. Fuel flow meters, machinery and exhaust sensors, generator loads, and navigation information feed into a common infrastructure. Data is processed on an onboard server, passed to the cloud, and then pushed to office screens and mobile devices. Technical managers and inspectors ashore can watch the ship's operating conditions remotely.
The parameter list is long. It covers machinery sensors, emissions data, fuel consumption, propulsion data, navigation and weather conditions, and voyage plans. The hourly fuel consumption of main engines, diesel generators, and boilers is tracked, along with how long equipment runs under different loads, RPMs, and fluid temperatures. Fuel replenishment timing and quantities are logged too.
The alerting side matters as much as the logging. According to Karataş, the system can flag anomalies in fuel flow meters, excessive RPM, and abnormal boiler temperatures, and it records when equipment starts and stops. By tracking tank levels and fuel movements together, it also produces records that help teams investigate unusual consumption patterns.
The reason to analyze these streams together is that a single number rarely explains itself. Karataş's example: if a ship burns more fuel to hold the same speed, that could be weather, loading condition, or hull and propeller performance. Looking at one sensor in isolation invites the wrong diagnosis. That's his core warning, and it's why he kept coming back to experience.
The compliance pressure behind the investment
Karataş placed the push toward monitoring within the IMO's 2023 greenhouse gas strategy, which aims for net-zero emissions from international shipping by 2050 or around that date. He argued that digital tools make consumption visible, help identify inefficiencies, and show whether measures actually work.
The session also covered three specific frameworks, and they measure different things. The Energy Efficiency Existing Ship Index (EEXI) evaluates a ship's technical energy efficiency. The Carbon Intensity Indicator (CII) assesses annual operational carbon intensity. That split is the practical point: a ship's design characteristics and its day-to-day operating performance both need watching, and they don't show up in the same data.
The European Union Emissions Trading System (EU ETS) adds a direct cost link. Under the scheme as the European Commission describes it, verified emissions carry a delivery obligation, so emissions and operating costs are tied together. Accurate fuel consumption measurement and reporting therefore matters for cost management, not just environmental performance. For operators running European trades, that's where monitoring starts to pay for itself.
Where the energy goes, according to the example ship
One of the more useful parts of the presentation was the equipment-level breakdown. In the example ship calculation Karataş used, roughly 79% of total emissions came from the main engine and 19% from auxiliary machinery. Within the group of equipment examined, cooling pumps accounted for around 47%. These ratios belong to that example and its assumptions. They aren't fleet-wide benchmarks, and a reader shouldn't treat them as one.
Still, the cooling pump example points to a pattern worth checking on any ship. Karataş noted that cooling pumps can keep running at high power even when seawater temperature and actual cooling demand have dropped. That mismatch may be an inefficiency worth investigating. Continuous monitoring is meant to catch it and show the conditions under which consumption climbs, so operators can adjust how the equipment runs.
Hull, propeller, and exhaust data
Hull and propeller performance drew a lot of attention, particularly in relation to maintenance timing. Karataş highlighted slip, the gap between a propeller's theoretical advance and the ship's actual advance, and said it's most useful when read next to other operational data. Combining RPM, speed, fuel consumption, and environmental conditions helps pinpoint why performance is dropping and when cleaning or maintenance will pay off.
On exhaust data, Karataş said regular automated recording can ease environmental documentation and cut the errors that creep in with manual entry. He was equally clear that people still need to verify sensor readings and track measurement deviations. Automation reduces transcription errors; it doesn't remove the need for someone to ask whether a reading makes sense.
Performance claims to treat with care
The presentation put forward two headline figures. Voyage optimization, it said, could save 5–10% in fuel, and integrated data analysis could deliver more than a 10% increase in ship performance. The materials didn't include the measurement period, the comparison conditions, or any independent verification. These are performance claims made by Karataş, and they should be tested against your own fleet data before anyone builds a budget around them.
Energy options for existing ships
Karataş also made the case that older ships can get more efficient through equipment renewal and better operation. Battery-supported silent operation, hybrid power systems, and shore power were the main options. As an example, he described a 2021 project on the Sunreef 70 yacht Nudnik in Marmaris, where batteries and solar panels were set up to allow silent operation for up to 18 hours a day.
In hybrid setups, electric motors, batteries, and conventional propulsion work together. Shore electricity was presented as one way to cut generator running time in port. None of these options is new on its own. The argument was that monitoring data helps decide which combination makes sense for a specific ship.
The barriers Karataş named
Karataş listed the obstacles he sees most often: integrating data held in separate systems, connecting to older equipment, investment cost, personnel training, and cybersecurity. He added two points that often get overlooked. Once a system is running, the reliability of its data has to be maintained continuously. And the crew has to be able to interpret what appears on the screens. A dashboard nobody understands is just another source of noise.
His closing message tied it together. The existing fleet can hold its value through maintenance, modernization, and sound operation. For digital transformation to deliver, technology providers, ship crews, and shore-side technical management need to work more closely, systems need to interoperate, and engineering judgment needs to stay in the decision chain.
Session and program details
Karataş's talk ran on Thursday, November 5, 2026, from 14:30 to 15:00 at the Istanbul Yenikapı Fair Center, as part of the BlueBridge Maritime Istanbul 2026 presentation series. The session was titled "Real-Time Monitoring in Practice: Onboard Sensors, Engine Health and Operational Decisions." EUROPORT Istanbul ran November 4–6, 2026.
The fair's business matching program, MariMatch, scheduled face-to-face meetings on November 5 from 10:30 to 17:30 and online meetings on November 12. If you're planning to attend or follow up, the full two-day session list is available through the EUROPORT–BlueBridge program.